Skip to content
ผลการค้นหาสำหรับ: "Shut-Off"
Cylinders
จุดเด่นของ SHUT-OFF VALVES – 19E*.A.00.MF
- Non-return valves that can close the suction line in the event of air leakage from the suction cup that is not located on the workpiece or not fully adherent to it.
จุดเด่นของ SHUT-OFF VALVES WITH CONTROLLED LEAKEGE LOSS – 19E*.A.*.MF
- Non-return valves that can close the suction line in the event of air leakage from the suction cup that is not located on the workpiece or not fully adherent to it.
Air distribution
- 3/2 N.C. poppet valve for opening and exhausting the circuit
- Allows to pneumatically supply the part of the system downstream of the valve
- Manual adjusting lockable handle (in shut-off position) with a maximum of three pad-locks
- Atex certification (II 2GD o II 3GD) on request
Air distribution
- 3/2 N.C. poppet valve for entering and exhausting the circuit
- It allows to pneumatically supply the part of the system downstream of the valve
- Opening and closing of the valve via solenoid operator
- The supply pressure must be minimum 2 bars or higher
- It is possible to produce the external supplied solenoid version by mounting the 305.10.05 between the valve main body and the solenoid pilot valve.
- The air supply can only be done via port 1
- Ensure that the downstream air consumption will not cause a pressure drop which could result in the pressure falling below the minimum operating values.
- If the pressure inside the valve falls below 2 bars, the valve might shut off.
- Atex certification (II 2GD o II 3GD) on request
Air distribution
- 3/2 N.C. poppet valve for entering and exhausting the circuit
- It allows to pneumatically supply the part of the system downstream of the valve
- Opening and closing of the valve via solenoid operator
- The supply pressure must be minimum 2 bars or higher
- It is possible to produce the external supplied solenoid version by mounting the 305.10.05 between the valve main body and the solenoid pilot valve.
- The air supply can only be done via port 1
- Ensure that the downstream air consumption will not cause a pressure drop which could result in the pressure falling below the minimum operating values.
- If the pressure inside the valve falls below 2 bars, the valve might shut off.
- Atex certification (II 2GD o II 3GD) on request
Pneumatics and Process Interfaces
Burkert – Type MKRS – Redundancy Valve Block for Safety Related Shut-Off Function
จุดเด่นของ Type MKRS
- DIN-rail mounting
- Pressure switch included
- Redundancy functions possible
Pneumatic and Automation
- บำรุงรักษาสะดวก: ติดตั้งนอกถัง ช่วยให้ทำความสะอาดและซ่อมบำรุงได้ง่าย
- ทนทานสูง: ผลิตจากสแตนเลส 316 เกรดพรีเมียม เพื่ออายุการใช้งานที่ยาวนาน
- รัศมีการทำงานกว้าง: ครอบคลุมพื้นที่การไหลของวัสดุตั้งแต่ 2 ถึง 8 ft (ขึ้นอยู่กับรุ่น)
- ถอดประกอบเร็ว: ใช้ข้อต่อ Tri-clamp ติดตั้งหรือถอดออกได้ทันทีโดยไม่ต้องใช้เครื่องมือ
- วาล์วลิขสิทธิ์เฉพาะ: มีชิ้นส่วนเคลื่อนที่เพียงชิ้นเดียว ปิดสนิททันทีหลังฉีดลมเพื่อป้องกันวัสดุไหลย้อนเข้าอุดตัน
ROSS Controls® Products
- High-speed poppet construction
- Constant repeatability
- Non-friction Viton seals on metal seats
- Non-lube
- Specialized low-wear body coating
- Blowhead compatible
- Separate Kick-Off valve available
- Built-in flow controls and inlet shut-off
- Built-in pressure boosters
- Special base and two signal options
NEW
General Puspose Solenoid Control Valves
*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
2/2 Solenoid Valve
- Safety shut-off valve in fuel cell systems and other hydrogen applications
- Very compact solenoid valve with reliably high tightness and service life
- Available for up to orifice 12 mm and pressure range 40 bar
- Available as flange or cartridge variant for quick system integration
- Degree of protection IP65 or IP6K9K with automotive plug
ROSS Controls® Products
- Individual Valve Shut-off (automatic): increases uptime for continuous processing
- Sure-Shifting and Self-Cleaning: reliable performance in extreme conditions (dirt tolerant, high humidity, cold, heat, dust, debris returned from the field actuator, etc...)
- Positive Sealing and Self-Compensating for Wear: perpendicular poppet face seals
- Quick Electrical Disconnect w/Indicator Light: allows immediate troubleshooting of component/system issues in the field
- Consistent Actuation over the Life of the Valve: strong shifting forces
ROSS Controls® Products
- Individual Valve Shut-off (automatic): increases uptime for continuous processing
- Sure-Shifting and Self-Cleaning: reliable performance in extreme conditions (dirt tolerant, high humidity, cold, heat, dust, debris returned from the field actuator, etc...)
- Positive Sealing and Self-Compensating for Wear: perpendicular poppet face seals
- Quick Electrical Disconnect w/Indicator Light: allows immediate troubleshooting of component/system issues in the field
- Consistent Actuation over the Life of the Valve: strong shifting forces
ROSS Controls® Products
- Safety Cat. 2 PL c, 2/2-Way Valve, External Monitoring
ROSS Controls® Products
SV27 Series Single Valve | Safety Cat. 2 PL c, External Monitoring with & without Manual Lockout L-O-X